Validating the moderating role of age in multi-perspective acceptance model of wearable healthcare technology

The recent trend of aging population, not to mention the unprecedented pandemic, draws great attention from the general public about health concerns. Since healthcare information technology is different from non-healthcare information technology, additional contexts should be properly incorporated into technology acceptance research to accurately identify influential factors affecting the acceptance of wearable healthcare technology. Thus, we selectively reconfigured factors from health, privacy, and socio-demographic contexts to formulate a health-aware acceptance model. Then, it was empirically analyzed using structural equation modeling. Based on the results, whereas privacy concerns were directly associated with intention to use wearable healthcare technology, health concerns were not. Moreover, age had a moderating effect on social influence and facilitating conditions. These findings suggest valuable insights that the adoption rate of healthcare technology is increased by 1) keeping personal information securely, 2) facilitating social interaction among users, and 3) offering intuitive user experience for elderly people.     

5G技术在医院智能服务中的应用

纵观当今的发展格局,是科学技术高速发展的时代。随着5G时代的来临,网络技术在各个领域中扮演着越来越重要的角色。特别是在医疗方面,为医院的日常工作奠定了坚实的基础。今天就5G网络技术在医院只能服务中的应用展开谈论。     

Position-varying surface roughness prediction method considering compensated acceleration in milling of thin-walled workpiece

Machined surface roughness will affect parts’ service performance. Thus, predicting it in the machining is important to avoid rejects. Surface roughness will be affected by system position dependent vibration even under constant parameter with certain toolpath processing in the finishing. Aiming at surface roughness prediction in the machining process, this paper proposes a position-varying surface roughness prediction method based on compensated acceleration by using regression analysis. To reduce the stochastic error of measuring the machined surface profile height, the surface area is repeatedly measured three times, and Pauta criterion is adopted to eliminate abnormal points. The actual vibration state at any processing position is obtained through the single-point monitoring acceleration compensation model. Seven acceleration features are extracted, and valley, which has the highest R-square proving the effectiveness of the filtering features, is selected as the input of the prediction model by mutual information coefficients. Finally, by comparing the measured and predicted surface roughness curves, they have the same trends, with the average error of 16.28% and the minimum error of 0.16%. Moreover, the prediction curve matches and agrees well with the actual surface state, which verifies the accuracy and reliability of the model.     

基于“天空地”一体化技术的安全监测系统建设与应用

西藏江达县白格村金沙江右岸于2018年10月11日和2018年11月3日先后发生2次大规模滑坡—堰塞湖堵江事件,溃堰洪水对下游拉哇库区不良地质体的稳定性造成不同程度的影响。为保障下游水电站建设安全,对拉哇库区主要不良地质体建立了基于星载InSAR技术、无人机技术和地面传感器实时监测的“天空地”一体化监测预警体系,以多维空间采集技术获取变形信息,通过智能监控平台对信息及时进行处理、分析和可视化呈现,利用平台、短信等方式向相关人员进行分级告警,取得了较好的应用效果。     

Amination of biochar surface from watermelon peel for toxic chromium removal enhancement

Watermelon peel residues were used to produce a new biochar by dehydration method. The new biochar has undergone two methods of chemical modification and the effect of this chemical modification on its ability to adsorb Cr(VI) ions from aqueous solution has been investigated. Three biochars, Melon-B, Melon-BO-NH_2 and Melon-BO-TETA, were made from watermelon peel via dehydration with 50% sulfuric acid to give Melon-B followed by oxidation with ozone and amination using ammonium hydroxide to give Melon-BO-NH_2 or Triethylenetetramine(TETA) to give Melon-BO-TETA. The prepared biochars were characterized by BET, BJH,SEM, FT-IR, TGA, DSC and EDAX analyses. The highest removal percentage of Cr(VI) ions was 69% for Melon-B,98% for Melon-BO-NH_2 and 99% for Melon-BO-TETA biochars of 100 mg·L~(-1) Cr(VI) ions initial concentration and 1.0 g·L~(-1) adsorbents dose. The unmodified biochar(Melon-B) and modified biochars(Melon-BO-NH_2 and Melon-BO-TETA) had maximum adsorption capacities(Qm) of 72.46, 123.46, and 333.33 mg·g~(-1), respectively.The amination of biochar reduced the pore size of modified biochar, whereas the surface area was enhanced.The obtained data of isotherm models were tested using different error function equations. The Freundlich,Tempkin and Langmuir isotherm models were best fitted to the experimental data of Melon-B, Melon-BO-NH_2 and Melon-BO-TETA, respectively. The adsorption rate was primarily controlled by pseudo-second–order rate model. Conclusively, the functional groups interactions are important for adsorption mechanisms and expected to control the adsorption process. The adsorption for the Melon-B, Melon-BO-NH_2 and Melon-BO-TETA could be explained for acid–base interaction and hydrogen bonding interaction.     

引水隧洞瓦斯封堵施工技术探讨

山西中部引黄工程24标西干29+089.4~29+278隧洞段地处煤层带,富含瓦斯、一氧化碳等有害气体,且围岩节理发育、变形严重。针对初期支护完成地段、掌子面及裸露洞段和IV类围岩地段提出瓦斯封堵专项施工方案。通过密切监测做好通风,并采用高分子材料马丽散对其注浆,可有效解决隧洞瓦斯封堵难题,为类似项目提供参考。     

基于熵权TOPSIS的工程咨询机构BIM技术应用能力评价

构建工程咨询机构BIM技术应用能力评价的指标体系,提出改进的熵权TOPSIS评价模型,以4个典型的工程咨询单位为例,进行BIM技术运用能力评价。研究表明,BIM行业的整体水平已经有了明显的提升,但是区域间的发展还存在一定差距。     

酶解-挤出复合工艺对高直链淀粉材料制备和性质的影响

以高直链淀粉为原料制备的淀粉基材料力学性质优良。但其熔融流变性差,挤出加工能耗高。本论文采用酶解-挤出复合工艺,考察了耐高温α淀粉酶对挤出环境的耐受性,以及酶加入量、挤出时间等参数对材料制备和性质的影响。结果表明,耐高温α淀粉酶在密炼机的挤出环境中依然有酶活力,能够促进淀粉颗粒的结构相变,从而降低单位机械能耗,缩短加工时间。具体而言,在0.25%的酶加入量下(淀粉干基重量),G50淀粉挤出加工的单位能耗下降了21%。但酶解也会造成分子链的降解,削弱材料性质。与空白材料相比,经酶解-挤出工艺的淀粉基材料,其拉伸强度降低了33%,断裂伸长率减少了83%。另一方面,耐高温α淀粉酶对G80淀粉挤出加工的影响不显著。上述结果表明,可以利用酶解-挤出复合工艺降低生产能耗,缩短加工时间,且酶解会提高淀粉的活性位点和反应效率,有利于淀粉的反应挤出。     

基于VRS技术的煤矿地表变形监测实践研究

随着采深的增大,晋华宫矿开采过程产生严重的地表沉降问题,对该矿地面建构及设施造成了安全隐患。该矿选择采用虚拟参考站技术(VRS技术)来对地表沉降进行测量监测。监测结果表明,VRS技术具有更好的准确性和科学性,在监测过程中表现出测量范围广、工作效率高、工作量小的特点,可以对该矿地表沉降问题进行有效监测。